Deutsche Welle, 23 January 2013
In order to
take advantage of high wind speeds on the open seas, the race is on to create
wind turbines and wind farms that float on the surface of the water. But, the
jury is still out on which is the best method.
Erecting a
wind turbine in the middle of the ocean is a costly and time-consuming
business. Most importantly, the structure must be anchored at the bottom of the
sea to ensure its stability in the face of extreme wind and rough seas. The
project is normally only feasible up to depths of 50 meters of water.
But, a new
generation of wind turbines no longer has that problem. Mounted on pontoons
which are attached to the ocean floor by long steel cables, floating wind
turbines are now the new trend in the renewable energy scene. First prototypes
are already being tested.
A floating
tower
The world's
most advanced floating wind turbine has floated in the North Sea off Norway
since 2009. It's called the Hywind turbine, and looks like a kind of giant,
bottle-shaped buoy. The tower with the rotor blades at its tip rises high into
the air, while the body of the turbine is settled deep in the ocean, weighed
with cement ballast. This gives it the stability it needs to stay upright in
heavy weather.
![]() |
The "Hywind" floating wind turbine, with its cement ballast |
But it's
not the only way of producing a floating wind turbine. The alternative to a
floating buoy like Hywind, is a floating island. Windfloat, installed off the
Portuguese coast in 2011, is a turbine mounted on a large triangular base, with
three separate floating corner pontoons.
Sweden's
Hexicon firm has ambitious plans. They want to design a pontoon that measures
half a kilometer in length, scheduled to carry 24 turbines. It's a floating
wind park complete with its own power station.
Safely
moored
With all of
the options, cables tether the installations to concrete blocks on the floor of
the ocean. The companies involved say that the turbines can be based in waters
that are up to 700 meters deep.
Frank
Sandner, an engineer at the University of Stuttgart, says the technology has
massive potential. "Many countries all over the world have steeply sloping
coasts," he told DW. "Floating wind turbines are the only chance to
utilize the wind energy out on the ocean."
An
additional advantage of floating wind parks is the cost. The rotor blades are
mounted on land, in a dry dock, before the installation is towed offshore. That
means there is no need for costly construction work on the high seas.
There are,
however, disadvantages. Like a ship, the floating turbines rock and heave on
the waves. In principle, the solution to that problem is simple – make the
device heavier so that it less susceptible to waves. That calls for an
extremely large amount of material, Sandner says. "With the current cost
of steel, that would be much too expensive."
Engineers
are working on alternative solutions to get around the extra material costs.
Intelligent systems that would pump ballast water from one tank to the next to
stabilize the wind turbine or the option of tightening the cables that moor the
structure to stabilize it in heavy seas.
No even
keel
No matter
what tricks engineers come up with - they will never succeed in stabilizing the
floating turbines to an extent that they stand completely rigid and fixed. They
will always rock.
"In
the swell of the waves, the installations can easily tilt by up to 15
degrees," according to Andreas Heege, the director of Barcelona-based LMS
Samtech, a company that produces specialized wind power software. He adds that
today's generation of wind turbine rotor blades are not designed to function in
those sort of conditions.
![]() |
Windfloat is a three cornered pontoon island, that floats on the surface of the sea |
Exposed to constant motion, floating wind turbines experience much more wear and tear than fixed offshore facilities. The rocking motion also interferes with power generation. When the installation reels into the wind it is hit by significantly stronger winds than just a moment later, when it rocks back into the other direction. "The result is erratic power generation that we have to balance by carefully adjusting the rotor blades," Heege said.
One thing
is clear. Mounting a regular wind turbine on a pontoon is not likely to
function. Engineers will have to develop new, specialized rotor blades.
Economic
feasibility at issue
Which of
the two different concepts currently being tested – either the turbine weighted
with ballast or the floating wind park island – will win the race is not yet
settled. Both prototypes are doing quite well, Frank Sandner said. "Which
concept is superior has not yet become apparent."
In both
cases, the most important question is commercialization. That means, which is
of the turbines can be produced reliably and at low cost. Experts say the
structures would have to be more slender than at present, using much less
material - which in turn would threaten stability.
It is akin
to a tightrope act, said Andreas Heege: "To make the proposition
profitable, we will have to push ourselves to our technological limits."
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.